Please register or log in.
  • (5 pages)
  • 1
  • 2
  • 3
  • 4
  • 5
  • next
  • last
Recent ads
  Title Category ascendingdescending Created ascendingdescending Picture
add to favorites LK NH STENTER MADE IN TAIWAN New Machines ! - LK N LH CO LTD 14-11-12
Stenter 【Basic designs】 1 Machine Name：6-CHAMBER STENTER 2 Model：SE62800NGPC ( Pin & Clip) 3 Roller width ：2,800mm Max working width：2,600mm Min. working width： 600mm 4 Treating fabrics：for knitting or woven fabrics use. 5 Power supply：400 VOLT (+5% , -5%) 50 HZ 3 PH Control Voltage：220 VOLT 6 Heating sources：Nature Gas or LPG heating 7 Max. applied temperature：up to 220℃ 8 Heat Consumption：Max. 150,000Kcal/hr/chamber(＜2,800mm) Max. 200,000Kcal/hr/chamber(＞3,000mm) 9 Evaporations：Max. Drying capacity 250 kg/hr. (up to fabrics) Each chamber drying + heat-setting 150 kg/hr approx. 10 Main drives：By AC motor with Inverter control. Main drive : 25 HP 11 Overfeeding device：Designed as +60～-10％ 12 Painting：Grey + Blue colors. 13 Machine designed speed ： 10 – 80 M/min (6-chambers) . 14 Paddle mangle driven motor ：By Inverter control, one scroll rollers for knitting fabrics or one bow for woven fabrics. 15HP (＜2,800mm) 15 Fan motor：By Inverter control 10HP*2/per chamber(＜2,800mm) 16 Exhaust blower： 10.0HP(6~7chembers) 【Supply scopes】 1 Entry section 1.1 Fabric feeding scaffold , tension adjustment rolls .(for carriage uses) Fabric feeding frame made by u-type steel, stainless steel guide roller And tension adjustment rollers (with adjustment handle) 1.2 Infrared sensor Centering device It combined with 3 stainless steel scroll rollers, photoelectric centering and with auto spreading cloth guider, with infrared-sensor protection rod. 1.3 Stainless steel guide roller 2　　　　　　　 Bowls 2.1 Synthetic Rubber roller The top roll Covered by synthetic rubber and transmitted through gear reducer and sprocket chains. The bottom roll Covered by synthetic rubber and connect with Air cylinders for high pressure squeezing. 2.2.1 Scroll roller with individual drive 2.2.2 Bow roller with individual drive. 2.3 Trough Stainless steel made, with pneumatic lifting system and one Impregnation roll. 2.4 Pneumatic and electric control elements. 2.5 Via chains and fully controllable motor with speed reducing gearbox. Motor by inverter control 2.6 Chemical preparation tank 300 litres and electric mixer with 1/4 H.P. motor driven. 2.7 Stainless steel protection cover. 2.8 Speed compensator with 2 swing rollers By S-shape anti-deflection with pneumatic control the tension. Tension can be adjusted randomly, range 5-25 kgs.(Air pressure 1.3 – 6.5 kg/cm2) 2.9 Air compressor with 3 H.P. motor。 2.10 Skew type straighter by push button driven or manual type. The max. calibrated values for woven weft fabric is 500 mm. 3 Entry Box 3.1 Control bridge and central control boards It included all operation switches and interface boards, with machine flow chart indicated by lamps, it is easy to touch by all the operators. 3.2 Entrance device. 3.2.1 Supporting rope device 3.2.2 Feeding roller transporting roller： By motor driven with inverter controlled, covered with special PVC craft, durable for touching, stability in overfeeding. 3.2.3 Stainless steel made Scroll roller： 2 sets of scroll roller by individual driven. 3.2.4 Skew roller (push button control)： Push button control for left and right adjustment, for the wefts correction only. 3.2.5 Feeding roller covered by synthetic rubber： By motor driven with inverter controlled, covered with special PVC craft, durable for touching, stability in overfeeding. 3.2.6 Stainless steel roller for the skew straighter by manuals 3.2.7 Position drives：LK type Infrared sensor type in double functions, to resist the interference of the light resource, specially for stenter use.Also easy to do the edge alignment for the sulfur based black rushed fabrics and more difficult one. 3.2.8 (UNCURLER)：by 4-fingers types 3.2.9 Pneumatic Overfeed Pinning on device： LK type auto modulating set and feed-back controller by closed circle system, to ensure the quality stability. 3.2.10 Chain rails width adjustment section(6.4 meters long)，with special graphite plates are attached on the top and side portion of chain guide , conveyor chains are horizontal type by returning roller , anti-loose device and chains lubrications device. 3.2.11 Pinning failure auto stop device 3.2.12 Temperature controller, system indicating board and Fan motor control board. 4 Drying, Tentering and heat-setting chamber, it composes of following： 4.1 Chamber length：Each chamber in 3 meters long. 4.2 Constructions： Chamber made by angle bar and U-type steel for the frame, mineral wools on both sides, top and bottom of housing, with silicone sealing on the edge to prevent the Heat lost. 4.3 Motor for the hot air circulation fan：Each chamber with 2 sets of Fan motor. 【Centrifugal type】 4.4 Jet-nozzle： Ellipse shape，Jet-nozzle was specially designed and the hot airs keep in vertical blowing, temperature distribution evenly. 4.5 Gas Burner： each chamber equipped with one set of gas burner. 4.6 Screen filter： Made by steel meshes , each chamber have 3 sets. With draw-off filters 4.7 Temperature control system： Each chamber is equipped with one automatic temperature controller, one temperature sensor (PT100ohm).. 4.8 Air volume damper： Each chamber have equipped with air Volume damper, can be manual adjusted for Air volume from the top and bottom, range：Up to 60% - 100% 4.9 Safety door 5 Fabric transport arrangement device. 5.1 Rails： Each chamber is equipped with one 3 meters long chain rails, are horizontal on both sides of housing, high tensile cast iron made and designed in consideration of thermal expansion at high temperature, special sliding manganese steel plates are attached on the top and side portion of chain guide. 5.2　 Chains and transporting device： By high tensile cast iron made, pitch 101.6mm, designed in consideration of thermal expansion factors, endurable. 1 Set 5.3 Pin plate： standard type : #19 * 34 pins. Angle 15’. 1 Range 5.4 Main drives： By induction motor with inverter control, with intermediate shaft, powerful V-belt and precision chain drives in strong built bearing, with drive for remote indication of machine speed at control cabinet. 1 Range 6 Cooling zone 6.1 Air cooling device, located after the last chamber and with 3 H.P. Fan motor (2 sets), upper and down side blowing. Each set have one individual ON/OFF switch, the air volume can be adjusted by manuals, range 50% - 150% 1 Range 7 Exit section 7.1 Exit rails length in 2.8M 1 Range 7.2 Fabric pinning off device 1 Range 7.3 Plaiting down device. (rollers type), plaiting down range : 0.8 – 1.5 m.. 1 Range 7.4 Static eliminating device：2 anti-static eliminating bars located on plaiting arm, remove the static for safety. 1 Range 7.5 Exit monitor in big color screen. (including video camera and color monitor.) 1 Range 7.6 Fabric take off speed adjustment device Fabrics delivery rollers (top and bottom) by motor driven, covered with black color craft, fabric delivery in stable. 1 Range 7.7 Exit box control panel： It includes control board, speed meter, length meter, cooling fan switch, etc., easy to operate. 8 Working width adjustment (rails width) device 8.1 First section of entry chain-rails are moved by synchronously a drive unit of edge scanners. 1 Range 8.2 Second section of entry chain rails to the exit section Are driven by 3 H.P. motor for the whole width adjustment. From the longitudinal shaft to the treated spindles, worm drive. Controlled by push button switch on operation panel of the stenter entry. 1 Range 9 Exhaust-air blower (The exhausting ducts is Buyer’s preparations, the Seller offers the drawing only.) 9.1 Exhausted air from each chamber removed via duct work by an exhausted air blower, which is driven via v-belt-form induction motors . 1 Range 9.2 Each chamber exhausting air by the air damper adjustment range : 20% - 100% 10 Central Control cabinet It included with all electric breakers , electro-magnetic contactor , relays , inverters , illuminating bulbs, emergency stop alarm system, etc., １ Range 11 Push button control rails lubrications system. Each time of lubrication volume can be controlled individually. 1 Range 12 Speed meter (metric system) 1 Set 13 Width meter (metric system) 1 Set 14 Length meter (metric system) 1 Set 15 Inter-phone(to connect with entry box and exit box, for the operator use only) 1 Set
add to favorites Singeing Desizing range New Machines ! - XINLIAN PRINTING - Singeing Desizing 12-11-12
LMH003-220 SINGEING AND DESIZING RANGE Sngeing and desizing of cotton, TC etc. Machine Basic ● Brand : Xinlian ● Origin :China ● Model : LMH003-220 ( Singeing range ) ● roller width：2200㎜ ● working width 2000mm ● Machine hand: Left or Right (subject to customers’ requirement) ● Machine speed：10-100m/min. ● AC frequency conversion transmission ● compressed air pressure:≤0.4Mpa ● steam pressure: ≤ 0.3 Mpa ● Heating By Gas ● total power:30Kw ● Machine appearance size: 17150×5600×4300 Machine flow： TJ88 debatch(with J-box) Entry frame MH013 brushing box MH003C burner singeing MHX504 open washer XLP692B padder MHX504 open washer XLP691 padder TJ88 debatch(with J-box) entry frame batcher Machine Specification： 1. Fabric entry frame and debatch ◆ C shape steel frame and one clothe tension and one roller. ◆ Adopt pneumatic clothe guider. ◆ Active roller with 6 tape angle plates is hired roughneck, avoid tangling cloth. ◆ SS J-Box，fabric content 300m ◆ Change the roll and not stop the range. 2. Brushing box: ◆ Monolayer is vertical, fabric from brush hair upward ◆ 4 brush rollers, two emery cloth rollers, 2 emery roller, manual worm wheel worm adjust fabric arc and angle. A absorb dirt fan motor. 3. Burner unit: ◆ Four automatic efficiency spray burners from China Taizhou. ◆ Light a fire voluntarily to install. ◆ Machine stop, the burner can be automatic shutdown ◆ Every burner with a cooling roller, dia 150mm, the distance between fabric and burner can regulate. 4. MHX504 open washer： ◆ U sing thickness of two side-plates is 3mm SS, cut by laser, CNC machines and blasted. Top and Bottom plates is 2mm SS. ◆ roller Φ 150 ㎜, the board of 2 mm of stainless steel and the carbon compound bale of 2 mm of steel plate cover roller. ◆ The bearing seat of stainless steel, machinery is sealed up. ◆ Up roller use bearing rolls, and the down roller use the bearing seat of stainless steel, machinery is sealed up. ◆ Indirectly heating pipe is even and heating. ◆ casing side set thermometer, surface and horizontal surface become 45 ℃ angle, observe easily. ◆ Up 5 rollers and down 4 rollers. ◆ Two chemical tank(500L) 5．Padder ◆ Adopting on press type structure (steel roller in take off, rubber roller in on, repair convenience), the frame of cast iron. ◆ Rubber rollers are fully cemented by Wuxi No.2 Rubber Plant ◆ Motor and gear box is from Wuxi Gear Box Plant. ◆ Bearing is from USA TIMKEN. ◆ Use cylinder press, the cylinder use self-lock, when the machine stop it can avoid the rubber roller long time to press the ss roller, protect the rubber roller. ◆ Piston cylinder pressurization, stainless steel spray to pour pipe and shed water board. ◆ The self-made pneumatic control case of stainless steel. Disposition pressure regulator valve and pressure show, reversal valve. ◆ Before every nip use a banana roller. At the two sides, use water shield ring.XLP691 padder：Driving roller is stainless steel rollerφ220mm，with the bale of seamless steel tube, cover the board of 3 mm of stainless steel; Press rubber roll φ255mm, with the bale of seamless steel tube cover the cubes of 20 mm rubber. Pressure 3 T, transmission power 3 KW. ◆ XLP692B padder：Driving roller is stainless steel rollerφ300mm，with the bale of seamless steel tube, cover the board of 3 mm of stainless steel; Press rubber roll φ300mm, with the bale of seamless steel tube cover the cubes of 20 mm rubber. Pressure 6 T, transmission power 7.5 KW. 6．Batcher： ◆ C shape steel frame. ◆ Batcher roller is a rubber roller dia 200mm. ◆ Use two air-cylinders up and down. ◆ Power is 2.2 kw. ◆ Before batcher has a banana roller. 7. Electrical cupboard: ◆ spray to mould cupboard shell installation air-condition, have illumination. ◆ Mitsubishi Inverter /and PLC ◆ Schneider switches ◆ machine alternating frequency control ◆ Buyer supplies power, voltage:380V,50Hz
add to favorites MONFORTS MONTEX STENTER 9 CHAMBER WW 1800MM GAS YEAR 1991 Used Machines ! - Processing - Stenter 09-11-12
MONFORTS MONTEX STENTER 9 CHAMBER WW 1800MM GAS YEAR 1991 BRAND : MONFORT MONTEX 6G/K + 12/K STENTER YEAR 1991 SUITABLE FOR WOVEN AND KNITTED FABRICS, ENTRY LENGTH 5 METER, WORKING WIDTH 1800 MM, 9 BAYS, EXTENSIONING ROLLERS, HORIZONTAL PINCHAIN, GASHEATING, ENTRY 5 METER WITH 3-FINGER-UNCURLERS AND PHOTOCELLS, CENTRALISING DEVICE MONFORTS MATEX-2 PADDER 2 BOWLS ELECTRONIC BIANCO WEFTSTRAIGHTENER 4 HEADS, EXIT WITH SELVEDGE-CUTTING COOLING DEVICE PLAITER AND BATCHING MOTION.
add to favorites 1250KVA VISA GLAXY DIESEL GENT SET New Machines ! - VISA Spa 09-11-12
400/231V - 50 Hz - 0.8 PF Prime power (PRP): 1253.0 kVA Standby power (LTP): 1350.0 kVA Perkins engine model 4012-46TWG2A with tropical radiator Stamford alternator model PI734A Automatic (AMF) Guard Evolution panel ABB circuit breaker on board ATS box separated from the genset Water heater and battery charger Batteries, battery disconnector 400 Lt bunded tank integrated in the baseframe Semiresidential mufflers Soundproof version "S"
add to favorites MONFORTS STENTER WW 2400MM 8 CHAMBER GAS YEAR 2006 Used Machines ! - Processing - Stenter 08-11-12
MONFORTS STENTER WW 2400MM 8 CHAMBER GAS YEAR 2006 MAX. WORKİNG WİDTH 2400 MM, YEAR 2006 (WORKED ONLY 1 YEAR), 8 CHAMBERS, HORİZONTAL PİN CHAİN, GAS HEATİNG, FOULARD, MAHLO WEFT STRAİGHTENER, J-BOX ENTRY, GLUİNG AND TRİMMİNG SYSTEM, COOLİNG DEVİCE, EXİT TO PLAİTER AND BATCHER, HEAT RECOVERY SYSTEM.
add to favorites Glaxy Gen Set 1MW New Machines ! - VISA Spa 06-11-12
400/231V - 50 Hz - 0.8 PF Continuous power (PRP): 1.030 kVA Standby power (LTP): 1.110 kVA Perkins engine model 4008TAG2A with tropical radiator Stamford alternator model HCI6J Automatic (AMF) Guard Evolution panel ABB circuit breaker on board ATS box separated from the genset Water heater and battery charger Batteries, battery disconnector 400 Lt bunded tank integrated in the baseframe Semiresidential mufflers Soundproof version "S"
add to favorites Tex Talk High Speed New Machines ! - TEX TALK 25-10-12
characteristic： *Using the highest Kyocera printer heads in the world. *8 color and 4 color double printing mode . *Automatic cleaning & scraping ink device . *Automatic moisturizing device. *Media automatic correction device . *Movement roll devices to smooth the meadia. *The conduction band’s correction device. *Up to 260 sq.m/h, it can fully meet the printing production requirements.
add to favorites D1608 High resolution New Machines ! - TEX TALK 25-10-12
characteristic： * The printing system uses imported original photo machine equipments. * High precision grayscale nozzles with 4 colors, 6 colors and 8 colors printing modes, can meet the high-precision, high-quality printing needs * The conduction band transmission platform uses wallboard benchmark block.The machine is stable and can ensure print quality.
add to favorites D1808 High resolution New Machines ! - TEX TALK 25-10-12
D1808 guide belt textile digital ink-jet printing machine。The machine has nearly 20 independent innovation of patent technology including automatic scraping ink, automatic moisturizing and automatic correction function etc. The machine is exquisite, nice looking and delicated made. Print width is 1800 mm. The maximum resolution can reach up to 1000 dpi; five work modes includes 720×200 dpi, 720×400 dpi, 720×600 dpi, 720×800 dpi, 720×1000 dpi; print speed can reach 100 square meters/hour. Till now, it is the highest resolution digital printing machine at this speed. Stable ink system icludes 8 colors and 4 colors double print modes, using professional textile printing Wasatch SoftRIP, which makes the color more expressive. This machine is equipped with 1800 series drying cases, and 10 colors ink, 8 colors acid ink, suitable for dyeing printing cotton, viscose, linen, silk, wool and its blending materials.
add to favorites CCR L Calander New Machines ! - GUOGUANG 23-10-12
GuoGuangBeaujady CCR® L calender also has its advantages for production and offers a wide range of effect variants enabling textile finishers to meet diverse fabric and quality requirements. The hydrostatic support elements which produce the pressure in the nip, are arranged at an angle of 90° to each other and can be controlled completely independently. The retraction sources for protection of the CCR® sleeve were aligned, so that they uniformly relieve the edge areas in both nips. Only the CCR® L calender from GuoguangBeaujady controls the pressure completely individually. This effective pressure control enables two different effects to be achieved on one calender and one operation. The soft hand effect in particular is positively influenced due to the fabric being guided with constant and without any noteworthy cooling. These different effect can easily be combined to produce sophisticated total effects, which were inconceivable up to now.
add to favorites CCR I CALANDER New Machines ! - GUOGUANG 23-10-12
Crown controllable roll (CCR) ® I 2 bowl calender is a typical example of an unusually flexible and efficient calender solution. Its advantages lie in its diverse range of applications, particularly when special effects are required, e.g. smoothness, lustre, high glaze and air permeability. An innovative development with significant efficient benefits, the hydropneumatic width adjustment, which can be reset in a flying change when operating pressure or fabric widths change. This reduces non-productive times, makes production even more flexible and increases efficiency.
add to favorites 5,7 Rolls calnader New Machines ! - GUOGUANG 23-10-12
5,7 rollers small pressure calender can finish the fabric one time twice or both side.
add to favorites Four Roll double Side Calander New Machines ! - GUOGUANG 23-10-12
Used to finish one side twice finishing or fabric double side finishing. The first section can use Nipco type machine to meet the demand of pressure adjustable, and adopt more finishing temperature. The second section can use fixed Crown calender
add to favorites MA MULTIFUNCTIONAL UP AND DOWN PRESS CALANDER New Machines ! - GUOGUANG 23-10-12
Main Character: Normally use 2 nylon roll having up&down pressed at one time, increasing the heating time. After the fabric being delivered , cool the fabric by chiller water roll rapidly to lead the finishing effect called “leather film”.
add to favorites MA SERIES New Machines ! - GUOGUANG 23-10-12
MA SERIES conventional calenders provide best choices for the upper and bottom soft bowl.  Normally it apply the upper bowl as nylon bowl, the bottom bowl is wool paper bowl or cotton bowl. The middle bowl is the steel heating bowl.  Each bowl has separate drive, so the fabrics can be passed through the two different soft bowl to increase the heating time.  By passing the cooling bowl after fabric exit, cooperated by relative technics, the fabric can reach the involucra handfeel.There are 3 applications of the fabric passing method of the MA Series to meet different requirements of the finishing fabric.  Passing 1-2 bowl , 2-3 bowl, 1-2-3 bowl.
add to favorites MH SERIES New Machines ! - GUOGUANG 23-10-12
GuoguangBeaujady 2 bowl or 3 bowl MH SERIES conventional calender concept are the best-seller calenders for different applications. With its different bowls configuration gives high performance where the deflection compensation control is not required.  Change different soft bowl to get the different finishing effect. Speed:5-50m/min stepless adjustable Pressure applications:20-140tons Fabric width:1000mm-6000mm Soft bowl applications: Cotton bowl, wool paper bowl, cotton paper bowl, nylon bowl Heating method: electrical heating, thermal oil heating PLC/touch screen as automation if necessary
add to favorites Sets silenced by container POWERFULL New Machines ! - VISA Spa 22-10-12
Visa SpA uses containers for sets with standardized ISO Size (10 to 40 feet), suitably modified to optimize the flow of cooling and the noise level. On customer request can be constructed in container sets with non-standard sizes and specifications. All models are equipped with hooking system twist-lock standards for transport with truck. The cooling of the generators is ensured by a system of muted inputs / outputs air made with arrangements which may vary depending on the type of motor to be installed, the level of residual noise that is desired or other variables. The insulation of the walls and the roof is accomplished by application of rock wool and fibrous and metallic protections, the entire drain line is protected by special thermal insulating mats. Sets silenced by container POWERFULL Sets Sets silenced FOX-S Sets open-GO GALAXY GALAXY-GX Silent Generators Generators POWERFULL open-B open POWERFULL-M Sets Sets POWERFULL open-U Sets soundproof POWERFULL-S Sets silent super-POWERFULL SS Sets silenced by container POWERFULL
add to favorites Sets silenced FOX-S New Machines ! - VISA Spa 22-10-12
The new range of generators FOX silenced proposes a target application with very wide powers from 9.00 to 24.00 kVA at 50 and 60Hz. The new qualities of compactness, robustness and low noise make it suitable for all uses, mobile and stationary type or civil shipbuilding. A variety of equipment and a wide range of accessories are available for the new FOX personalizzazione.Il includes the now standard tests and reliable Guard Evolution. The great affidbilità mechanics of the machine is supported by a software very stable and efficient in terms of accuracy and number of features is unmatched in the market. Backlit display large emergency button, key lock and circuit breaker complete the equipment of the control panel.
add to favorites Sets silenced GALAXY GX New Machines ! - VISA Spa 22-10-12
The range GALAXY, has always offered the best compromise between compactness and usability. Through wide doors is guaranteed maximum accessibility to all devices making it very easy to control all operations and maintenance. Thanks to a huge effort in the design and testing and a careful choice of materials and workmanship, the GALAXY canopy is one of the most comfortable and quiet in its category. No detail has been overlooked to achieve the target of an electricity efficient and resistant to weathering. Sets silenced GALAXY-GX
add to favorites Sets open POWERFULL-B New Machines ! - VISA Spa 22-10-12
The reliable range of generators GALAXY "GO", with capacities ranging from 9 to 805 kVA, is proposed in 7 engines (Perkins, Volvo, Iveco-FPT, Deutz, John Deere, Yanmar, Cummins) and 3 electrical installations (Marelli, Stamford and sync). gensets in open version GALAXY "GO" are made with the new frame type "GV" already prepared for the application of the enclosure or the load hook and comes with modular tanks. Sets open GALAXY-GO